Optimization of Transducer Location for Novel Non-Intrusive Methodologies of Diagnosis in Diesel Engines

The health monitoring has been studied to ensure integrity of design of engine structure by detection, quantification, and prediction of damages. Early detection of faults may allow the downtime of maintenance to be rescheduled, thus preventing sudden shutdown of machines. In cylinder pressure developed, vibrations and noise emissions data provide a rich source of information about condition of engines. Monitoring of vibrations and noise emissions are novel non-intrusive methodologies for which positioning of various transducers are important issue. The presented work shows applicability of these diagnosis methodologies adopted in case of diesel engines. The effects of changing various fuel injection parameters was analyzed. Scope of using non-intrusive technique has been analyzed by changing locations of microphone. Novelty of this worklies in exploring signal processing methods for various locations around the engine test set up. Various frequency ranges of contributing noise and vibration sources were identified. Time-Frequency analysis showed the onset of various cyclic. Based on the identification of various frequency bands, it is possible to device suitable filters in order to extract more information.     

Nanocomposite hydrogel consisting of Na‐montmorillonite with enhanced mechanical properties

A new kind of nanocomposite (NC) hydrogel with Na‐montmorillonite (MMT) is presented in this article. The NC hydrogels were synthesized by free radical copolymerization of acrylamide and (3‐acrylamidopropyl) trimethylammonium chloride (ATC) in the presence of MMT and N,N′‐methylene‐bis‐acrylamide used as chemical cross‐linker. Due to the cation‐exchange reaction between MMT and ATC (cationic monomer) during the synthesis of NC hydrogels, MMT platelets were considered chemical “plane” cross‐linkers, different from “point” cross‐linkers. With increasing amount of MMT, the crosslinking degree enhanced, causing a decrease of the swelling degree at equilibrium. Investigations of mechanical properties indicated that NC hydrogels exhibited enhanced strength and toughness, which resulted from chemical interaction between exfoliated MMT platelets and polymer chains in hydrogels. Dynamic shear measurements showed that both storage modulus and loss modulus increased with increasing MMT content. The idea described here provided a new route to prepare hydrogels with high mechanical properties by using alternative natural Na‐MMT. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1020–1026     

一阶最优性条件研究

本对由Botsko的关于多变量函数取极值的一阶导数检验条件定理^[1]进行了分析研究，给出了更实用而简捷的差别条件。最后，举出若干例子予以说明。     

C^n中子空间之间极端主角的一些应用

本文给出了Ｃ＾ｎ中子空间之间最大和最小主角在矩阵逼近，投影算子的扰动分析，群逆以及Ｏｒａｘｉｎ逆的扰动估计，条件数理论，Ｂｏｔｔ－Ｄｕｆｆｉｎ系统扰动分析中一些应用。     

一类小缺陷码的链条件

利用射影几何方法在小缺陷码中,NMDS码是链条件码;给出k维NμMDS(0μk-2)码满足链条件的一个充要条件与一些易判断的充分条件.     

关于左手性介质几何光学的研究（一）

根据几何光学中的费马原理和完善成像原理研究了光线经过正负折射率界面时的传播特性，推导了单负折射率完善成像的曲面方程，讨论了单块负折射率透镜成像特性的一些缺陷及改进方案，依此指出了最短时间原理的适用范围的局限性和利用左手性介质制作光学器件的优越性，为进一步研究左手性介质的光学特性和相关光学器件设计提供了理论基础.     

非完整系统Chetaev动力学和vakonomic动力学的等价条件

就一般非完整约束系统，从约束方程满足的变分恒等式出发，利用增广位形流形上的向量场定义三类非自由变分，即非完整变分：vakonomic变分、Hlder变分、Suslov变分，并讨论它们之间的关系以及它们成为自由变分的充要条件.利用非完整变分以及相应的积分变分原理建立两类动力学方程：vakonomic方程和Routh方程或Chaplygin方程.通过vakonomic方程分别与Routh方程和Chaplygin方程比较，得到它们具有共同解的两类充分必要条件.这些条件并不是约束的可积性条件. 关键词： 非完整约束 非完整变分 Chetaev条件 vakonomic动力学     

93W合金有关力学参量的综合选评

 对93W合金材料进行了超声测量实验，并结合原有的超声测量结果进行了分析比较，提出了可以直接用冲击波速度关系式的三个系数c₀ 、λ和λ′来对钨合金的有关力学参量，如G₀、K₀、G₀′、K₀′等进行综合选评的方法。得到了一组对93W合金较为合理的力学参量推荐值。     

图有分数因子的度条件

本文研究了图有分数因子的度条件,得到了下面的结果：令k(?)1是一个整数,G是一个连通的n阶图,n(?)4k-3且最小度δ(G)(?)k,若对于每一对不相邻的顶点u,v∈V(G)都有max{d_G(u),d_G(v)}(?)n/2,则G有分数k-因子．并指出该结果在一定意义上是最好可能的。     

Inequalities for the Moments and Distribution of the Ladder Height of a Random Walk

We obtain upper bounds for the tail distribution of the first nonnegative sum of a random walk and for the moments of the overshoot over an arbitrary nonnegative level if the expectation of jumps is positive and close to zero. In addition, we find an estimate for the expectation of the first ladder epoch.